The torsion shear electric wrench is a type of electric tool specifically used for torsion shear high-strength bolts, mainly used in the steel structure installation industry. The purpose of this wrench is to break the plum blossom head of the torsion shear high-strength bolt and achieve the purpose of tightening the bolt.

扭剪型电动扳手的使用方法很简单。，将扳手头对准螺栓头，然后扣动开关开始工作。几秒钟后，螺栓梅花头将被打断，然后抽出扳手扣动扳机将梅花头弹出，即结束工作。这种电动工具的使用效果主要表现在冲击电动扳手主要用于初紧螺栓，而电动扭剪扳手主要用于终紧扭剪型高强螺栓。

The use of a torsion shear electric wrench is very simple. Firstly, align the wrench head with the bolt head, and then press the switch to start working. After a few seconds, the bolt head will be broken, and then the wrench will be pulled out and the trigger will be pulled to eject the head, ending the work. The use effect of this type of electric tool is mainly manifested in that the impact electric wrench is mainly used for initial tightening of bolts, while the electric torsion shear wrench is mainly used for final tightening of high-strength torsion shear bolts.

此外，在使用扭剪型电动扳手时，需要注意一些事项。例如，使用前应该检查扳手的完好性，确保其能够正常工作。同时，使用时应该注意，避免受伤。在使用完毕后，还需要对工具进行清洁和保养，以延长其使用寿命。

In addition, some precautions need to be taken when using a torsion shear electric wrench. For example, the integrity of the wrench should be checked before use to ensure that it can function properly. At the same time, attention should be paid to safety during use to avoid injury. After use, it is necessary to clean and maintain the tool to extend its service life.

总之，扭剪型电动扳手是一种专门用于扭剪型高强螺栓的电动工具，具有使用简单、方便、快捷等优点。在使用时，需要注意和保养，以保证其正常运转和延长使用寿命。

In short, the torsion shear electric wrench is a specialized electric tool for torsion shear high-strength bolts, which has the advantages of simple, convenient, and fast use. When using, it is necessary to pay attention to safety and maintenance to ensure its normal operation and extend its service life.