服务热线: 400-117-8816
           13406879330

扭剪扳手,扭剪螺栓专用扳手,扭剪电动扳手,扭剪枪生产厂家

当前位置:首页>新闻中心扭剪扳手厂家:扭剪扳手常见故障及维修?

扭剪扳手厂家:扭剪扳手常见故障及维修?

来源:日期:2024-09-02 发布人:创始人

  扭剪扳手是一种常用的手动工具,用于紧固和松开螺栓和螺母。以下是扭剪扳手常见的故障及维修方法:

  A torque wrench is a commonly used manual tool for tightening and loosening bolts and nuts. The following are common faults and maintenance methods of torque shear wrenches:

01

  1. 扭剪扳手无法扭转:可能是扳手内部的齿轮损坏或者润滑不足。方法是拆开扳手,清洁和润滑齿轮,或者更换损坏的齿轮。

  1. The torque wrench cannot be twisted: it may be due to damaged gears or insufficient lubrication inside the wrench. The solution is to disassemble the wrench, clean and lubricate the gear, or replace the damaged gear.

  2. 扭剪扳手扭力不准确:可能是扳手内部的弹簧松弛或者损坏。方法是拆开扳手,检查弹簧的状态,如果松弛或者损坏,需要更换弹簧。

  2. Incorrect torque of the torque wrench: It may be due to loose or damaged springs inside the wrench. The solution is to disassemble the wrench and check the condition of the spring. If it is loose or damaged, the spring needs to be replaced.

  3. 扭剪扳手扭力过大或过小:可能是扳手内部的调节装置失效或者损坏。方法是拆开扳手,检查调节装置的状态,如果失效或者损坏,需要更换调节装置。

  3. Excessive or insufficient torque of the torque wrench: It may be due to the failure or damage of the internal adjustment device of the wrench. The solution is to dismantle the wrench and check the status of the adjustment device. If it fails or is damaged, the adjustment device needs to be replaced.

  4. 扭剪扳手手柄松动:可能是手柄内部的螺纹松动或者损坏。方法是拆开手柄,检查螺纹的状态,如果松动或者损坏,需要更换螺纹。

  4. Loose handle of torque shear wrench: It may be due to loose or damaged threads inside the handle. The solution is to disassemble the handle and check the condition of the threads. If they are loose or damaged, the threads need to be replaced.

  5. 扭剪扳手外观损坏:可能是扳手外壳受到撞击或者磨损。方法是更换外壳或者进行修补。

  5. Damage to the appearance of the twist and shear wrench: It may be due to impact or wear on the wrench housing. The solution is to replace the casing or repair it.

  维修扭剪扳手需要一定的知识和技能,建议在维修人员的指导下进行。

  Repairing torque wrenches requires certain professional knowledge and skills, and it is recommended to do so under the guidance of professional maintenance personnel.

本文由扭剪螺栓专用扳手友情奉献.更多有关的知识请点击:/真诚的态度.为您提供为的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.

This article is a friendly contribution from the special wrench for twisted shear bolts. For more related knowledge, please click: / Sincere attitude. We provide you with excellent service. We will gradually contribute more knowledge to you. Please stay tuned