角向扭剪电动扳手是一种用于紧固螺栓、螺钉等连接件时进行控制扭矩和角度的工具。它通常应用于需要严格控制紧固件预紧力的工程领域，如汽车制造、航空航天、机械制造等。
Angular torsion shear electric wrench is a tool used to control torque and angle when tightening bolts, screws, and other connectors. It is usually applied in engineering fields that require strict control of fastener preload, such as automotive manufacturing, aerospace, mechanical manufacturing, etc.
以下是关于角向扭剪电动扳手的一些基本知识：
The following are some basic knowledge about angular torsion shear electric wrenches:
工作原理：角向扭剪电动扳手通过内置的电动驱动系统提供旋转动力，通过电子控制系统精确控制扭矩和角度。它通常配备了传感器来检测扭矩和角度，并可以根据预设参数进行自动调整。
Working principle: The angular torsion shear electric wrench provides rotational power through the built-in electric drive system, and accurately controls torque and angle through the electronic control system. It is usually equipped with sensors to detect torque and angle, and can be automatically adjusted according to preset parameters.
扭矩控制：角向扭剪电动扳手能够控制所施加的扭矩大小。扭矩通常以牛顿米（N·m）为单位进行测量。通过电子控制系统，可以设置所需的扭矩数值，并在达到预设值时停止扭矩输出，以确保连接件被正确地预紧。
Torque control: The angular torsion shear electric wrench can control the amount of torque applied. Torque is usually measured in Newton meters (N · m). Through the electronic control system, the required torque value can be set and the torque output can be stopped when the preset value is reached to ensure that the connecting parts are correctly pre tightened.
角度控制：除了扭矩控制外，角向扭剪电动扳手还可以控制连接件的角度。角度通常以度（°）为单位进行测量。通过电子控制系统，可以设置所需的角度数值，并在达到预设角度时停止旋转，确保连接件被正确地旋转到指定角度。
Angle control: In addition to torque control, the angle shearing electric wrench can also control the angle of the connecting piece. Angles are usually measured in degrees (degrees). Through the electronic control system, the required angle value can be set and the rotation can be stopped when the preset angle is reached, ensuring that the connector is correctly rotated to the specified angle.
数据记录和分析：许多角向扭剪电动扳手具备数据记录和分析功能。它们可以记录每次紧固操作的扭矩、角度等参数，并将这些数据保存在内部存储器或通过无线通信传输到计算机或云端。这些数据可以用于质量控制、质量验证和故障分析等用途。
Data recording and analysis: Many angular torsion shear electric wrenches have data recording and analysis functions. They can record parameters such as torque and angle for each tightening operation, and store these data in internal memory or transmit them to a computer or cloud through wireless communication. These data can be used for quality control, quality verification, and fault analysis purposes.
使用注意事项：使用角向扭剪电动扳手时，需要遵循一些注意事项。例如，确保选择正确的扭矩和角度参数，定期校准和维护扳手，避免超过设定的扭矩和角度范围，避免使用扳手在超出其额定能力的工作条件下操作等。
Precautions for use: When using an angle shear electric wrench, it is necessary to follow some precautions. For example, ensuring the correct torque and angle parameters are selected, regularly calibrating and maintaining wrenches, avoiding exceeding the set torque and angle range, and avoiding using wrenches to operate under working conditions beyond their rated capacity.
需要注意的是，具体的角向扭剪电动扳手的技术细节和操作方法可能因不同的和型号而有所差异。因此，在实际使用时，建议参考相关的使用手册和操作指南，以确保正确而地使用角向扭剪电动扳手。
It should be noted that the technical details and operating methods of the specific angular shear electric wrench may vary depending on different brands and models. Therefore, in practical use, it is recommended to refer to the relevant user manual and operating instructions to ensure the correct and safe use of the angle shear electric wrench.
